Commercial & Industrial Matting Solutions
310 734 6036
Free shipping on most $99+ orders (
Kitchen / Food Service
Pool / Shower
Recessed / Grates
Shipping / Receiving
Stable / Barn / Kennel
Used and Surplus
Wider than 6'
Rail Color Finishes
1.40 lb. per sq ft
Rolling Load Test
300 lb / wheel
Request Quote by:
Calling us -
+1 (310) 734-6036
Emailing us -
Fax or Mail - print
Pawling EM-500 Roll-Dek is excellent for low to moderate traffic entrances such as office lobbies to employee entrances. Made out of extruded vinyl. Quick and easy to clean out, it can support rolling loads up to 300 pounds per wheel.
Thickness (height) - 7/16”
Allows water, dirt, and debris to accumulate under the surface so it can be used in moderate traffic areas or where cleaning would need to be done quickly and easily.
Panel Size – 144 ” wide x 96 ” long
Treads go up to 144 inches long. Therefore mat width is limited to 144 inches. Length - even though in theory it may be made any length but manufacturer does not recommend making each section longer than 96 inches.
With 3/16 inch gap between treads it will not act as a trap for heels and would still let debris and water drain under the mat.
Rolling Load Test – 300 lb / wheel (5” diameter 2” wide)
Making it total gross weight of 4-weeled cart 1200 pounds, or a 2-wheeled cart 600 lbs. Can easily handle loads such as shopping carts, bellman carts, carts bringing in light inventory or service items.
Rail Material – Extruded Rigid Vinyl
80 Durometer, flexible PVC. Flexible, strong, and durable, this material will perform consistently during a long life.
this mat is great for keeping the outdoors from getting into your building. This is made for dirt, water, and debris to be cleaned quickly and easily!
Easy cleaning and Maintenance
Once the mat is lifted the recessed area can be cleaned easily. A hose and a firm brush can quickly and easily clean both the mat and the recessed area. Make sure that the mat sits perfectly on the flat surface, or you may end up damaging the mat. After brushing and/ or hosing the mat, the 180 degrees roll-back provides easy access to the water, dirt, and debris to be cleaned out of the recess, or off the floor.
TREAD INSERTS :
Rigid-Back Nylon “SNC”
Solution dyed 100% nylon carpet, density of 33.8oz/sqyd . It is available in variety of colors. Carpet fibers fusion-bonded to two-ply backing strips. Carpet fibers incorporate anti-stain (Teflon), anti-static, and anti-microbial features.
(511) Plum Beige
(512) Desert Plum
(513) Terra Clay
(514) British Green
(515) Harbor Brown
(517) Crayon Blue
(518) Lancaster Gray
(519) Near Black
(591) African Violet
(593) Royal Air Force Blue
(594) Sugar Plum
(596) Winter Slate
These colors didn't come out very realistic. Ask for color swatch picture e-mailed or mailed to you before ordering.
Maxi-Tuft Long Wear “MLW”
Spaced dyed, 100% polyamide nylon, tetra-lobal fibers. Density 30oz/sqyd available in standard colors. Carpet fibers fusion bonded to continuous two-ply backing used as rail inserts. Carpet fibers incorporate anti-stain, anti-static, and anti-microbial properties.
Rigid Corrugated Vinyl “RCV”
Rigid vinyl extrusion with corrugated surface for improved slip resistance, for situtions where it is crucial. Available in manufacturer’s standard colors. Manufactured with pigments that are UV stable for improved color fastness.
(7) Terra Cotta
(289) Pearl Gray
(374) Ash Brown
(385) Beige Desert
Corrugated Aluminum “CA”
All metal aluminum alloy 6105-T5 insert. Extruded aluminum with corrugated surface for improved slip resistance. Available in mill finish (natural aluminum color).
(405) Mill Finish Aluminum
Abrasive Aluminum “AA”
Alloy 6105-T5 extruded aluminum with applied medium grit abrasive for maximum slip resistance. Aluminum is mill finish with abrasive available in manufacturer’s standard colors.
(7) Terra Cotta
Bristle Filament “BF”
Bristle filament carpet insert it is solution dyed polypropylene fibers with 50% blend of 600/12-denier multi filament and 595/D1 monofilament. There are five available manufacturer's standard colors for inserts, also fibers are waterproof and involve UV inhibitors for exterior use. Excellent indoor and outdoor performance.
(519) Near Black
The Rigid vinyl rails will be held together with the flexible vinyl ball socket hinge with 3/4 perforations for drainage.
1 and 11/16' vinyl threads connected by the hinge leaving 3/16 gap in between the threads. Distance between thread mid points - 1 and 7/8 inch
Given that treads and hinges have fixed width the mat will come with square vinyl nosing that will exceed required parameters. It will need to be trimmed on site to needed dimension. It is easily done with sharp utility knife.
Available frames for EM-500 Roll-Dek are as follows:
Recessed frame MRF 1002 aluminum or MRF1005 in bronze
Recessed frame SSF-125
Surface - mounted frame BSF 225 aluminum frame
Surface - vinyl nosing for surface mounted applications
Manufacturer: Pawling Corporation
Share your knowledge of this product with other customers...
Be the first to write a review
My Wish List
8 reasons why us?
Terms and Conditions
Copyright 2012 by MattingExperts.com, Corp. All rights reserved.
Shopping Cart Software