Home > Carpet-like > Miscellaneous > Work in Progress > Entrance_Runners >

Dante Mat

Alternative Views:

Price $4.23 - $5.36 per square foot
Price $4.23 for orders of $500 and up
Price $5.36 small orders (may include shipping)

Request Quote by:

	Calling us - +1 (310) 734-6036
	Emailing us - [email protected]

Dante commercial water retention floor mat

TECHNICAL :

*Standard Sizes :	2 x 3	3 x 4	3 x 5	3 x 6	3 x 10	4 x 6	4 x 8
Weight :	5 lb	11 lb	13 lb	16 lb	20 lb	25 lb	24 lb
Custom Sizes :	Custom sizing is available in: 3, 4 or 6 foot widths up to 60 feet in length Shipping weight for custom sizing is 0.84 lbs a square foot (plus packaging) – Allow 1-3 weeks for delivery
Full Rolls:	3 x 60 feet = 151 lbs, 4 x 60 feet = 202 lbs, 6 x 60 feet = 302 lbs

* Standard Sizes are often pre-cut and in stock so would ship faster than custom sizes
For metric size and weight conversions scroll to the bottom of this page.

3/8” Thick (.375 inches / 9.525 millimeters)
24oz of densely tufted cut pile with Decalon every 9 square feet
Smooth Carpet surface - Carpet contains 33% more than competitors
Non-slip, vinyl backing in matching color ensures minimum mat movement
Vinyl flat Black edges on all four side to complete the mats look
Weight is .84lbs a square foot
1 Year manufacturer warranty
Brown	Burgundy	Charcoal	Hunter Green	Red Black

Navy

DESCRIPTION :

131 Dante Entrance Mats are threaded with 33% more carpet the leader’s best olefin mats. Every nine square feet contains 24 ounces of densely tufted cut-pile decalon. Has high moisture retention and dries quickly. It is 3/8” thick mat ideal for narrow low profile doorways. Backing contains non-slip technology so mat stay still. Dante has six color options sure to fit any décor. Standard sizes that ship the fastest are below – typical turnaround time for standard sizes is 1-2 weeks from the date of order. Custom sizes will need an additional week or two (no more than 4 weeks.)

131 Dante Entrance Mats are low profile fitting any narrow doorway and are a great choice for a standalone mat for your main entry ways, or any area where there is medium foot traffic. All NoTrax products are easily maintained, some suggestions are below.

MAINTENANCE :

Vacuum daily in heavy traffic areas, for mild traffic every other day or as needed for great mat appearance. For a deeper clean use any neutral synthetic soap with warm water, for best results use 1/2 cup soap per gallon of warm water.) If needed; you can use a hand brush to get the more stubborn stains out but scrub lightly and in the direction of fiber. Be sure to rinse thoroughly with cool water – leaving it at a slight incline to be sure it dries entirely before using again. To treat an on the spot spill, absorb the liquid with a clean towel blotting it until most of the spill is absorbed. Oil/Grease stains; use a dry cleaning fluid method (NO water) in tiny amounts again blotting until stains are lifted. Manufacture will not be held responsible for any mats that were miss-handled during a cleaning process.

TESTING :

131 Dante Entrance Mats (NoTrax products) have been independently tested in the following conditions yielding positive results.
• Flammability (ASTM D2859, CPSC FF 1-70) Measuring the mats response as an ignition source within a controlled environment. To pass, the un-charred area must be greater than one inch. Mat Results were 2.22 Inches; Note - Passes Federal Flammability Study (DOC FF 1-70.)
• Accelerated Soiling (ASTM D6540-00): for a predetermined length of time the test piece was subjected to an accelerated soiling process. The sample was vacuumed – rated – submitted to an extraction device and then rated again. Results were based on a visually inspection – vacuum rating of 4; 5 Rating after Extraction.
• Abrasion Resistance (ASTM D3884-01): was done by rubbing two wheels across the surface in a controlled yet wear-away fashion. The results were measured by grams, which was a weight loss of 1.17 grams per test specimen.
• Accelerated Wear: an action of rollers with a specified load. Every sample was rotated ten degrees after every pass. Measured by thickness loss which testing resulted in a 14.20% loss.
• Water Retention: Sample piece was submerged for five minutes in water, removed - drained for fifteen seconds and weighed. Measured in/for weight gain (gallons per square yard) with results of .67

METRIC SIZE / WEIGHT CONVERSIONS:

Standard sizes:
Ship the fastest

2 X 3 ft

0.61x0.91 m

3 X 4 ft

0.91x1.22 m

3 X 5 ft

0.91x1.52 m

3 X 6 ft

0.91x1.83 m

3 X 10 ft

0.91x3.05 m

4 X 6 ft

1.22x1.83 m

4 X 8 ft

1.22x2.44 m

Weight:

2.29 kilograms

4.57 kilograms

5.72 kilograms

6.86 kilograms

11.43 kilograms

9.14 kilograms

12.19 kilograms

Custom Sizes:

Metric - 0.61, 1.22 and 1.83 meter widths and up to 18 meters in length. Shipping weight for custom sizing is 4.10 kg a square meter (plus packaging) – Allow 1-3wks for delivery

Full Rolls:

Metric - 0.91 x 18 m = 68 kg, 1.22 x 18 m = 91 kg, 1.83 x 18 m = 136 kg

Manufacturer/Notrax part numbers:

131C0036BD 131C0036BR 131C0036CH 131C0036GN 131C0036NB 131C0036RB 131C0048BD 131C0048BR 131C0048CH 131C0048GN 131C0048NB 131C0048RB 131C0072BD 131C0072BR 131C0072CH 131C0072GN 131C0072NB 131C0072RB 131S0023BD 131S0023BR 131S0023CH 131S0023GN 131S0023NB 131S0023RB 131S0034BD 131S0034BR 131S0034CH 131S0034GN 131S0034NB 131S0034RB 131S0035BD 131S0035BR 131S0035CH 131S0035GN 131S0035NB 131S0035RB 131S0036BD 131S0036BR 131S0036CH 131S0036GN 131S0036NB 131S0036RB 131S0046BD 131S0046BR 131S0046CH 131S0046GN 131S0046NB 131S0046RB 131S0048BD 131S0048BR 131S0048CH 131S0048GN 131S0048NB 131S0048RB 131S0310BD 131S0310BR 131S0310CH 131S0310GN 131S0310NB 131S0310RB

Manufacturer: NoTrax a product of Superior Manufacturing

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Carpet-like > Miscellaneous > Work in Progress > Entrance_Runners
Carpet-like