Request Quote by:
105 Chevron Entrance Mats are meant for all light to medium traffic areas. Zigzag design in a high/low fashion runs with the length of the mat holding moisture, at the same time scrapping debris and collecting it below shoe level. It is 5/16 thick mat ideal for narrow low profile doorways. It is threaded with 24 ounces of needle punched yarn every nine square feet with flat vinyl borders to complete the mats look. Vinyl backing ensures the mat will not move. Chevron is available in five color options sure to fit any dιcor. Standard sizes that ship the fastest are below typical turnaround time for standard sizes is 1-2 weeks from the date of order. Custom sizes will need an additional week or two (no more than 4 weeks.)
105 Chevron Entrance mats are a great choice for a standalone mat for your indoor entrance ways, lobbies, or any area where there is light to medium foot traffic, even if traffic is multi-directional. Compared to competitors, Chevron offers more carpet per square foot then its look-a-like products. All NoTrax products are easily maintained, some suggestions are below.
105 Chevron Entrance Mats (NoTrax products) have been independently tested in the following conditions yielding positive results. Flammability (ASTM D2859, CPSC FF 1-70) Measuring the mats response as an ignition source within a controlled environment. To pass, the un-charred area must be greater than one inch. Mat Results were 3.5 Inches; Note - Passes Federal Flammability Study (DOC FF 1-70.) Accelerated Wear: an action of rollers with a specified load. Every sample was rotated ten degrees after every pass. Measured by thickness loss which testing resulted in a 30.81% loss. Accelerated Soiling (ASTM D6540-00): for a predetermined length of time the test piece was subjected to an accelerated soiling process. The sample was vacuumed rated submitted to an extraction device and then rated again. Results were based on a visually inspection vacuum rating of 3.0; 5.0 Rating after Extraction. Water Retention: Sample piece was submerged for five minutes in water, removed - drained for fifteen seconds and weighed. Measured in/for weight gain (gallons per square yard) with results of .35 Abrasion Resistance (ASTM D3884-01): was done by rubbing two wheels across the surface in a controlled yet wear-away fashion. The results were measured by grams, which was a weight loss of 3.62 grams per test specimen.
105C0036BD 105C0036BR 105C0036BU 105C0036CH 105C0036GN 105C0048BD 105C0048BR 105C0048BU 105C0048CH 105C0048GN 105C0072BD 105C0072BR 105C0072BU 105C0072CH 105C0072GN 105S0023BD 105S0023BR 105S0023BU 105S0023CH 105S0023GN 105S0034BD 105S0034BR 105S0034BU 105S0034CH 105S0034GN 105S0035BD 105S0035BR 105S0035BU 105S0035CH 105S0035GN 105S0036BD 105S0036BR 105S0036BU 105S0036CH 105S0036GN 105S0046BD 105S0046BR 105S0046BU 105S0046CH 105S0046GN 105S0048BD 105S0048BR 105S0048BU 105S0048CH 105S0048GN 105S0310BD 105S0310BR 105S0310BU 105S0310CH 105S0310GN