Commercial & Industrial Matting Solutions
800 858 3417
Free shipping on most $99+ orders (
Barber / Salon / SPA
Fitness / Gym / Sports
Kitchen / Food Service
Locker Room / Shower
Recessed / Grates
Shipping / Receiving
Snow Melt / Heated
Stable / Barn / Kennel
Used and Surplus
Wider than 6'
Work / Safety Gear
Each tile is 9.6" x 9.6" and NOT one square foot
1.23 lbs per sq. ft.
Request Quote by:
Calling us -
+1 (310) 734-6036
Emailing us -
Fax or Mail - print
Thickness (height) - 1/2”
It is half on an inch thick at seams where ramps meet the tile and under the rest of the tile is a little thinner.
Made of soft and flexible vinyl .
Does not roll up. For application where tiles need to be moved often for cleanup we recommend gluing them together and forming larger sections that can be separated and carried. Keep in mind that this is heavy product so sections must be small and light enough to handle.
Comfortable to Bare Feet
Unlike a lot of competitor tiles it is not rigid / firm plastic. It is softer vinyl that flexes under weight and thus is comfortable to stand/walk on.
Cleaning and Maintenance
Hose-off if needed or for a deeper clean use a vinyl safe cleaner, after cleaning it don't forget to rinse the mat thoroughly. .
So far we carry in stock BLUE color only. We may be able to custom-order any color but lead times are about 2 months and minimum order would be 2000-3000 tiles.
VinTile MINI floor tiles
Keep in mind that these tiles are NOT 12"x12" (not one square foot):
EACH TILE measures 9 and 5/8 of the inch square (not including locking tabs). Each tile Weights 13 ounces (370 grams) per tile. Converted to square feet that would be 1.24 pounds per square foot. This is pretty heavy item comparing to other shower / locker room types of matting.
Given that they are made out of soft vinyl makes them pleasant to walk on bare foot. Texture on the surface provides additional traction minimizing slip/fall accidents. Tiles can easily be cut with utility knife (use new blade) to accommodate fixtures, pipes or get to exact dimensions needed. We will NOT cut tiles so you would have to have someone to do it on-site.
There are plenty of openings on the surface of the tile and design of the side facing the floor lets water easily drain away while supporting the weight of the person standing on top.
If assembled mats need to be moved for cleaning or other reasons fairly often you may use HH-66 Vinyl Cement to glue tiles together (be careful not to drip glue on the surface as it will damage it. We can sell the glue but we carry only 16 ounce cans. 16 ounces may be way too much for smaller projects and you may be able to get a better deal from other online vendors. We would not recommend gluing tiles to pieces that would weight too to much for one person to handle. Very heavy pieces may tear under their own weight while being handled.
2 and 3/8 inch wide edges and corners are highly recommended on sides that are perpendicular to the traffic. They provide smooth transition onto the thick tile reducing tripping hazard. Edges and corners are made from the same material so being flexible they will contour to uneven floor. Tabs will hold edges to attached to the tiles pretty well, however if you have young visitors that like picking things apart - HH-66 vinyl cement is a good answer.
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Locker Room / Shower Mats
My Wish List
8 reasons why us?
Terms and Conditions
Copyright 2012 by MattingExperts.com, Corp. All rights reserved.
Shopping Cart Software