Request Quote by:
139 Boulevard Entrance Matting is uniquely designed with high/low wave pattern with alternating Decalon yarn thats wrapped with a mono-filament fiber for aggressive scrapping abilities. Wave pattern runs across the mat so all foot traffic comes in touch with both the scrapping fiber as well as the drying fiber keeping your main floors as dry and free of debris as possible. Material is made of Delcalon which is a higher denier polypropylene yarn that holds its structure and appearance under constant heavy foot traffic. Decalon also has an exceptionally fast drying time, making it a perfect choice for indoor entrance ways. Boulevards also consist of Mono-Filament which typically is seen with fishing line but for this purpose, is looped in the mat roughly about every two inches ensuring that not only are your guests drying their shoes but theyre scrapping any dirt/mock carried in as well. Boulevard comes in six bright color options to choose from in a variety of sizes. Choose a standard manufacture size or have a custom mat made to your needs in 3ft, 4ft or 6ft widths up to 60ft in length. Backing is made of a non-slip vinyl color corresponding sheet ensuring mat will not move.
Ideal for any high traffic entrance way, lobby, long aisle or walkways for a scraper, as well as a catch all for debris and moisture - All while holding its structure, bright color, and great look. Using NoTrax 139 Boulevard with NoTrax 138 Uptown for an upscale look and exceptional drying/scraping system and is recommended by us and the manufacturer for areas that have constant foot traffic. Maintenance is a breeze also, as mats are easily rolled up for moving, cleaning, or storage. Manufacturers suggestions on cleaning is below.
All Boulevard Entrance Mats (NoTrax products) have been independently tested in the following conditions yielding positive results.
Flammability (ASTM D2859, CPSC FF 1-70) Measuring the mats response as an ignition source within a controlled environment. To pass, the un-charred area must be greater than one inch. Boulevard Mat Results was 3.6 Inches Note - Passes Federal Flammability Std. DOC FF 1-70.
Accelerated Soiling (ASTM D6540-00): for a predetermined length of time the test piece was subjected to an accelerated soiling process. The sample was vacuumed rated submitted to an extraction device and then rated again. Results were based on a visually inspection vacuum rating of 4.5 to 5 rating after extraction.
Accelerated Wear ASTM D5252-98a: A Hexapod tumble drum test. 4,000 cycles conducted to asses for appearance and color change. Results were a -2.2 for appearance and a -4.0 in color change.
Water Retention: Sample piece was submerged for five minutes in water, removed - drained for fifteen seconds and weighed. Measured in/for weight gain (gallons per square yard) with results of .882.
139C0036BD 139C0036BR 139C0036CH 139C0036GN 139C0036NB 139C0036RB 139C0048BD 139C0048BR 139C0048CH 139C0048GN 139C0048NB 139C0048RB 139C0072BD 139C0072BR 139C0072CH 139C0072GN 139C0072NB 139C0072RB 139S0023BD 139S0023BR 139S0023CH 139S0023GN 139S0023NB 139S0023RB 139S0034BD 139S0034BR 139S0034CH 139S0034GN 139S0034NB 139S0034RB 139S0035BD 139S0035BR 139S0035CH 139S0035GN 139S0035NB 139S0035RB 139S0036BD 139S0036BR 139S0036CH 139S0036GN 139S0036NB 139S0036RB 139S0046BD 139S0046BR 139S0046CH 139S0046GN 139S0046NB 139S0046RB 139S0048BD 139S0048BR 139S0048CH 139S0048GN 139S0048NB 139S0048RB 139S0310BD 139S0310BR 139S0310CH 139S0310GN 139S0310NB 139S0310RB